Nokia Display Car Kit CK-600 User Guide - Page 14

Get started To open the list of menu functions in the standby mode, press the wheel when Menu is displayed at the bottom of the display. To scroll to an item (such as a menu function) or through a list, turn the wheel left or right. To select an item, scroll to the item, and press the wheel. To return to the previous menu level, press . To return to the standby mode, press and hold until the standby mode screen is displayed. ■ Switch the car kit on or off If you are not certain whether the ignition sense wire is connected or not, consult with the technician who installed the car kit. Switch on If the ignition sense wire is connected, turn on the car ignition. When the car kit is switched on, the display and the indicator light of the input device turn on. If the ignition sense wire is not connected, press and hold for about 5 seconds. Alternatively, turn on the ignition, start driving, and wait until the built-in motion sensor switches the car kit on automatically (if the motion sensor is turned on). When the motion sensor is on, the car kit switches off after 2 minutes if no phone is connected to the car kit during this time; to switch the car kit back on, press and hold for about 5 seconds. To turn the motion sensor on or off, press the wheel in the standby mode, and select Settings > Installation > Ignition sensor. After the car kit is switched on, it tries to make a Bluetooth connection to the phone that was last used with it. Switch off If the ignition sense wire is connected, turn off the car ignition. If you have a call in progress on your phone connected to the car kit, the car kit switches off after you end the call. When the car kit switches off, the display and the indicator light of the input device turn off. 14