Nokia Display Car Kit CK-600 User Guide - Page 40
Input device CU-10, Display SU-34
View all Nokia Display Car Kit CK-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installation Do not mount the hands-free unit inside a metal housing or on a metal surface, because this will impair the Bluetooth connection between the hands-free unit and the Bluetooth device that is connected to the car kit. For an optimal connection, ensure that the distance between the hands-free unit and a metal surface is over 4 mm (0.16 inch). Install the hands-free unit in the car using suitable mounting material (not supplied in the sales package). Ensure that the hands-free unit stays securely in place. Input device CU-10 The input device should be located so that it is within easy reach of the user. Do not mount the input device within the head impact area. Ensure that the input device cable reaches to the hands-free unit for connection. The best location to mount the input device is horizontally on the console between the driver's and front passenger's seat so that the input device keys are toward the front of the vehicle. To mount the input device: 1. Attach the supplied tape pad to the desired location in the car: peel off the protective sheet from a side of the pad, and press the pad into place. When you peel off the protective sheet, do not touch the adhesive side with a finger. Ensure that the surface where you attach the pad is dry and free from dirt and dust. 2. Peel off the protective sheet from the pad on the underside of the input device and from the other side of the pad attached to the car. 3. Press the pads firmly against each other, and check that the input device stays securely in place. Display SU-34 The display should be located so that it is clearly visible for the user and it can be easily rotated left, right, up, or down. 40