Nokia Display Car Kit CK-600 User Guide - Page 41
Mount the stand to the dashboard, Attach the display to the stand or plate
View all Nokia Display Car Kit CK-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installation When installing the display, ensure that it does not interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle (for example, airbags). Ensure that the display cable reaches to the hands-free unit for connection. Mount the display on the dashboard in the upright position. When you peel off the protective sheet from the supplied adhesive, do not touch the adhesive with a finger. Mount the stand to the dashboard To use the display with the supplied stand: 1. Peel off the protective sheet from a side of the supplied adhesive, and attach it to the feet of the stand. 2. Place the display cable between the two feet of the stand, and lock it in place between the teeth of the feet. 3. Peel off the protective sheet from the other side of the adhesive, and press the stand firmly to the dashboard. Ensure that the surface where you attach the stand is dry and free from dirt and dust. Mount the plate to the dashboard To use the display with the supplied mounting plate: 1. Peel off the protective sheet from a side of the adhesive, and attach it to the plate. 2. Peel off the protective sheet from the other side of the adhesive, and press the plate firmly to a mounting device (such as a mounting bracket) that is attached to the dashboard. When you use screws instead of adhesives to install the plate, do not use screws if you mount it within the head impact area. To drill the bore holes, check the markings on the inner side of the plate that show where the screws can be placed. Attach the display to the stand or plate To attach the display to the stand: 1. Press the ball hinge on the stand into the socket on the connector part of the display cable (1). 41