Nokia Wireless Loopset LPS-5 User Guide - Page 10
to pair and connect the loopset, to your device. If your device does not have a keypad - user guide
View all Nokia Wireless Loopset LPS-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Get started 2. To pair the loopset if it has not been previously paired with a device, switch on the loopset. The loopset enters pairing mode, and the indicator light quickly flashes blue. To pair the loopset if it has been previously paired with another device, ensure that the loopset is switched off, and press and hold the multifunction key (for over 5 seconds) until the indicator light quickly flashes blue. 3. Within about 5 minutes, activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices. For details, see the user guide of your device. If the pairing is not initiated within about 5 minutes, the loopset switches off. 4. Select the loopset (Wireless Loopset LPS-5) from the list of found devices on your phone or music player. 5. If necessary, enter the passcode 0000 to pair and connect the loopset to your device. If your device does not have a keypad, it may use this passcode by default. In some devices, you may need to make the connection separately after pairing. If pairing is successful, the loopset appears in the menu of your device where you can view the currently paired Bluetooth devices. When the loopset is connected to your device and is ready for use, the indicator light slowly flashes blue. 10