Nokia Wireless Loopset LPS-5 User Guide - Page 13

Basic use ■ Select vibration mode You can set the loopset to vibrate in different situations. To select the desired vibration mode during a call (when there is no other call waiting or on hold), press and hold the multifunction key for about 2 seconds one or more times: • If the loopset beeps once, the loopset vibrates when you press a key or receive a call. • If the loopset beeps twice, the loopset vibrates when you press a key. • If the loopset beeps three times, the loopset vibrates when you receive a call. This is the default setting. • If the loopset beeps four times, the vibration is turned off. ■ Calls To make a call, use your mobile phone in the normal way when the loopset is connected to it. To answer or end a call, press the multifunction key, or use the phone keys. To reject a call, press the multifunction key twice. When you receive a call, the loopset vibrates and plays a ringing tone, and the indicator light quickly flashes blue. To switch a call from the loopset to the connected device, switch the loopset off, or use the related feature of your device (the loopset remains switched on). To switch the call back to the loopset, switch the loopset on (and connect it to your device), or if the loopset is switched on, press and hold the multifunction key for about 2 seconds. 13