NordicTrack 1300 Elliptical English Manual - Page 8

5. Identify the Right Pedal Plate (107), which is marked with an "R" sticker. 5 Attach the Right Pedal Plate (107) to the Right Pedal Arm (8) with three M10 x 20mm Patch Screws (108) and three M10 Split Washers 108 (110). 110 Repeat this step on the other side of the 107 elliptical exerciser. 8 6. Identify the Right Pedal Assembly (62), which is located in a package marked with a "Right" 6 sticker. Attach the Right Pedal Assembly (62) to the Right Pedal Plate (107) with five #10 x 1/2" Screws (79), five M6 Split Washers (111), and five #10 Fender Washers (80). Tip: There are eight holes around the Right Pedal Plate; only five holes will be used. To avoid damaging the Right Pedal Assembly, do not overtighten the Screws. Repeat this step for the other side of the elliptical exerciser. 62 107 80 Do not use these holes 111 79 79 8