NordicTrack 14.9 Elliptical English Manual - Page 9
Assembly
View all NordicTrack 14.9 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 8. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.nordictrackservice.com/ registration on your computer and register 1 your product. • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Care (see the front cover of this manual) and register your product. 2. With the help of a second person, place some of the packing materials (not shown) under the rear 2 of the Frame (1). Have the second person hold the Frame to prevent it from tipping while you complete this step. Identify the two Rear Stabilizers (5). Attach one of the Rear Stabilizers (5) to the Frame (1) with three M10 x 20mm Screws (144); start all three Screws, and then tighten them. Attach the other Rear Stabilizer (5) in the same way. Then, remove the packing materials from under the Frame (1). 5 144 144 1 5 9