NordicTrack A2350 Treadmill English Manual - Page 8

Star Washer 9. - treadmill

Get NordicTrack A2350 Treadmill PDF manuals and user guides View all NordicTrack A2350 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

4. Be careful not to pinch the Upright Wire (38). With the help of a second person, hold a Bolt 4 Spacer (80) inside the lower end of the Right Upright (78). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Right Upright and 78 the Bolt Spacer. Repeat this step with a sec- ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Then, set the Right Upright in the Right Upright Spacer (79). Tighten the 3/8" x 4" Bolts (6) until the heads of the Bolts touch the Right Upright (78); do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 6 79 9 38 77 80 83 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Pad (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a #8 x 1" Tek Screw (2). Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4), and the shipping bracket (C) from the Base (83). Attach a Wheel (84) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Discard the shipping bracket. 5 A 81 2 83 B 56 4 13 81 84 2 8 C 6. Set the Left Upright Spacer (76) on the Base 6 (83). With the help of a second person, hold a 6 Bolt Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and 74 the Bolt Spacer. Repeat this step with a sec- ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Then, set the Left Upright in the Left Upright Spacer. 9 77 76 Tighten the 3/8" x 4" Bolts (6) until the heads of the Bolts touch the Left Upright (74); do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 80 83 With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
8
6.
Set the Left Upright Spacer (76) on the Base
(83). With the help of a second person, hold a
Bolt Spacer (80) inside the lower end of the Left
Upright (74). Insert a 3/8" x 4" Bolt (6) with a
3/8" Star Washer (9) into the Left Upright and
the Bolt Spacer.
Repeat this step with a sec-
ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and
3/8" Star Washer (9).
Then, set the Left Upright
in the Left Upright Spacer.
Tighten the 3/8" x 4" Bolts (6) until the heads of
the Bolts touch the Left Upright (74);
do not
fully tighten the Bolts yet.
Press a Base Endcap (77) into the Base (83).
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
76
74
6
83
77
6
5.
With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).
Attach a Base Pad (81) to the Base (83) in the
location shown with a #8 x 1" Tek Screw (2) and
a Base Pad Spacer (13). Then, attach another
Base Pad (81) with only a #8 x 1" Tek Screw (2).
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),
and the shipping bracket (C) from the Base (83).
Attach a Wheel (84) with the Bolt and the Nut
that you just removed.
Do not overtighten the
Nut; the Wheel must turn freely.
Discard the
shipping bracket.
5
83
B
A
84
56
8
C
81
2
4
2
4.
Be careful not to pinch the Upright Wire (38).
With the help of a second person, hold a Bolt
Spacer (80) inside the lower end of the Right
Upright (78). Insert a 3/8" x 4" Bolt (6) with a
3/8" Star Washer (9) into the Right Upright and
the Bolt Spacer.
Repeat this step with a sec-
ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and
3/8" Star Washer (9).
Then, set the Right
Upright in the Right Upright Spacer (79).
Tighten the 3/8" x 4" Bolts (6) until the heads of
the Bolts touch the Right Upright (78);
do not
fully tighten the Bolts yet.
Press a Base Endcap (77) into the Base (83).
79
78
77
6
4
38
9
9
83
80
81
13
80