NordicTrack C 9.5 Instruction Manual - Page 11

the Sensor Wires 63 should slide easily

Get NordicTrack C 9.5 PDF manuals and user guides View all NordicTrack C 9.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

9. Untie and discard the wire tie on the Main Wire (110). While a second person holds the Console (7) near the Upright (4), plug the Main Wire (110) and the Sensor Wires (63) into the receptacles on the Console. 9 7 The connectors on the Main Wire (110) and the Sensor Wires (63) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the Console (7) may become damaged when you use the elliptical. Insert the excess wire into the Upright (4). 63 4 110 10. Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four 10 M4 x 16mm Screws (101); start all the Screws, and then tighten them. 7 Avoid pinching the wires 4 101 101 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
11
9
7
4
63
9.
Untie and discard the wire tie on the Main
Wire (110).
While a second person holds the Console (7)
near the Upright (4), plug the Main Wire (110)
and the Sensor Wires (63) into the receptacles
on the Console.
The connectors on the Main Wire (110) and
the Sensor Wires (63) should slide easily
into the receptacles and snap into place.
If a
connector does not slide easily into a receptacle,
turn the connector and try again.
If you do not
connect the connectors properly, the Console
(7) may become damaged when you use the
elliptical.
Insert the excess wire into the Upright (4).
110
10
10.
Tip: Avoid pinching the wires.
Attach
the Console (7) to the Upright (4) with four
M4 x 16mm Screws (101);
start all the Screws,
and then tighten them.
101
101
4
Avoid pinching
the wires
7