NordicTrack C 910i Treadmill English Manual - Page 10
Make sure that the power cord is unplugged., See the inset drawing., Make sure not to pinch
![]() |
View all NordicTrack C 910i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2. Make sure that the power cord is unplugged. 2 If the two Base Caps (74) are not in the Base (94), press them into the Base. Wire 81 A Tie 81 Next, remove the tie securing the Upright Wire (81) to the front of the Base (94). Identify the Right Upright (90). Have a second person hold the Right Upright near the Base 90 (94). See the inset drawing. Tie the wire tie in the Right Upright (90) securely around the end of the Upright Wire (81). Then, insert the Upright Wire into the lower end of the Right Upright as you 74 Wire Tie 90 pull the other end of the wire tie out of the Right 74 Upright. Then, remove and discard the indicated screw (A). 3. Lay the Right Upright (90) near the Base (94). Press the Grommet (77) into the square hole in 3 the Right Upright. Make sure not to pinch the ground wire. Then, attach the ground wire to the Right Upright (90) with a #8 x 1/2" Silver Screw (10) as shown. 94 94 10 90 77 Ground Wire Square Hole 10
![](/manual_guide/products/nordictrack-c-910i-treadmill-english-manual-13826ed/10.png)