NordicTrack C 910i Treadmill English Manual - Page 13
two 5/16 Star Washers 11., Remove and discard the four indicated
![]() |
View all NordicTrack C 910i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Attach a Handrail (86) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11). Be careful not to pinch the Upright Wire (81). Do not fully tighten the Screws yet. Attach the other Handrail (86) to the Left Upright (89) in the same way. Note: There is no wire on the left side. Remove and discard the four indicated screws (C). 8 28 11 C 86 28 89 C 11 81 86 90 9. Position the Pulse Crossbar (93) with the pulse wire (D) on the left side as shown. Start four #10 x 3/4" Screws (9) with four #10 Star Washers (5) into the Pulse Crossbar and the Handrails (86). Next, insert the pulse wire (D) through the looped Cable Tie (99) on the Left Handrail (86). Then, slide the Pulse Crossbar (93) as far as possible in the direction shown, and then tighten the #10 x 3/4" Screws (9); do not overtighten the Screws. Next, remove the wire tie from the Upright Wire (81). Then, tighten all four 5/16" x 2 1/2" Screws (28). 9 9 86 28 5 D 99 Wire Tie 93 81 9 86 5 28 13
![](/manual_guide/products/nordictrack-c-910i-treadmill-english-manual-13826ed/13.png)