NordicTrack C 910i Treadmill English Manual - Page 14
Deight #8 x 1/2 Screws 1, do not overtighten, the Screws., Then, remove and save the four indicated
![]() |
View all NordicTrack C 910i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
10. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Attach the Right and Left Trays (27, 36) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. Then, remove and save the four indicated 1/4" x 1/2" Screws (31). 10 1 31 36 1 1 27 1 Console Assembly 11. With the help of a second person, hold the console assembly near the left Handrail (86). 11 Make sure that the pulse wire (D) is inserted through the four looped Cable Ties (99). Then, route the pulse wire (D) as shown, and insert it into the gap indicated by the arrow. 99 31 Console Assembly 99 D 99 99 86 14
![](/manual_guide/products/nordictrack-c-910i-treadmill-english-manual-13826ed/14.png)
14
11.
With the help of a second person, hold the con-
sole assembly near the left Handrail (86).
Make sure that the pulse wire (D) is inserted
through the four looped Cable Ties (99).
Then, route the pulse wire (D) as shown, and
insert it into the gap indicated by the arrow.
Console
Assembly
86
D
99
99
11
10.
Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Attach the Right and Left Trays (27, 36) with
eight #8 x 1/2" Screws (1);
do not overtighten
the Screws.
Then, remove and save the four indicated
1/4" x 1/2" Screws (31).
Console
Assembly
1
10
31
31
1
1
1
27
36
99
99