NordicTrack C3000 Uk Manual - Page 8

2. Make sure that the power cord is unplugged. 2 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the tie securing the Upright Wire (38) to the Base (83). Locate the tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Pad (81) to the Base (83) in the location shown with a Base Pad Spacer (13) and a #8 x 1" Screw (2). Then, attach another Base Pad (81) with only a #8 x 1" Screw (2). 38 13 56 81 2 3. Attach a Wheel (84) with the 3/8" x 2" Bolt (4) 3 and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 83 4 Hole 83 81 2 84 8 4. Identify the Right Upright (78) and the Right 4 Upright Spacer (79), which are marked with 38 stickers. Insert the Upright Wire (38) through the 78 Right Upright Spacer as shown. See the inset drawing. Tie the wire tie in the Right Upright (78) securely around the end of the Upright Wire (38). With the help of a second person, hold the Right Upright near the Base (83). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. Wire Tie 38 79 83 38 8 78 Wire Tie