NordicTrack C3000 Uk Manual - Page 9

5. Set the Right Upright Spacer (79) on the Base 5 (83). Be careful not to pinch the Upright Wire (38). With the help of a second person, hold a Bolt Spacer (80) inside the lower end of the Right Upright (78). Insert a 3/8" x 4 1/4" Bolt (6) 78 with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4 1/4" Bolt (6), and 3/8" Star Washer (9). Then, set the Right Upright in the Right Upright Spacer. Tighten the 3/8" x 4 1/4" Bolts (6) with your fingers; do not fully tighten the Bolts yet. 6 79 9 38 80 83 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet. Attach a Base Pad (81) to the Base (83) in the location shown with a #8 x 1" Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a #8 x 1" Screw (2). Attach a Wheel (84) with the 3/8" x 2" Bolt (4) and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 6 81 2 83 56 4 13 84 2 81 8 7. Insert the Upright AV Cable (116) through the 7 hole in the Base (83), through the Left Upright Spacer (76), and up through the Left Upright (74). Set the Left Upright Spacer (76) on the Base (83). With the help of a second person, hold a Bolt Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4 1/4" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4 1/4" Bolt (6), and 3/8" Star Washer (9). Then, set the Left Upright in the Left Upright Spacer. Tighten the 3/8" x 4 1/4" Bolts (6) with your fingers; do not fully tighten the Bolts yet. With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 9 6 9 116 80 83 74 76