NordicTrack Elite 7700 Treadmill English Manual - Page 12

the Truss Head Screws 24. The Truss Head

Get NordicTrack Elite 7700 Treadmill PDF manuals and user guides View all NordicTrack Elite 7700 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

5. Hold the Tray (79) near the right Upright (84). Wrap the tie in the hole in the side of the Upright 5 B 79 around the end of the fan wire (B). Pull the fan wire through the hole and out the top of the Upright. Then, remove the tie. Identify the #8 x 3/4" Screws (5). IMPORTANT: Hole Do not confuse the #8 x 3/4" Screws (5) with the Truss Head Screws (24). The Truss Head Tie Screws have larger, flatter heads. 5 76 5 Attach the Tray (79) to the Upright Crossbar (76) with four #8 x 3/4" Screws (5). Start all four Screws, and then tighten them. 84 6. Attach the two Handrails (74) to the Uprights (84) with two of the 5/16" x 2" Screws (2) that you 6 removed in step 3 and two 5/16" Star Washers 2 (8). Do not fully tighten the Screws yet. Be 8 careful not to pinch the Upright Coaxial Cable C (78), the Upright Wire (83), or the fan wire (B). Position the wires as shown. Then, remove and discard the two indicated screws (C). 74 78 84 2 74 B 83 8 C 84 7. Set the console assembly (D) face down on a soft surface to avoid scratching the console 7 assembly. Remove and discard the four indicated screws (E). Then, remove the Pulse Crossbar (80). D E 80 E 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
12
5.
Hold the Tray (79) near the right Upright (84).
Wrap the tie in the hole in the side of the Upright
around the end of the fan wire (B). Pull the fan
wire through the hole and out the top of the
Upright. Then, remove the tie.
Identify the #8 x 3/4" Screws (5).
IMPORTANT:
Do not confuse the #8 x 3/4
"
Screws (5) with
the Truss Head Screws (24). The Truss Head
Screws have larger, flatter heads.
Attach the Tray (79) to the Upright Crossbar (76)
with four #8 x 3/4" Screws (5).
Start all four
Screws, and then tighten them.
5
5
84
Tie
B
76
5
79
Hole
6.
Attach the two Handrails (74) to the Uprights (84)
with two of the 5/16" x 2" Screws (2) that you
removed in step 3 and two 5/16" Star Washers
(8).
Do not fully tighten the Screws yet. Be
careful not to pinch the Upright Coaxial Cable
(78), the Upright Wire (83), or the fan wire (B).
Position the wires as shown.
Then, remove and discard the two indicated
screws (C).
C
78
84
74
8
7.
Set the console assembly (D) face down on
a soft surface to avoid scratching the console
assembly.
Remove and discard the four indicated screws
(E). Then, remove the Pulse Crossbar (80).
D
80
E
7
E
6
2
B
C
83
74
8
2
84