NordicTrack Elite 7700 Treadmill English Manual - Page 19
How To Connect An External Source
View all NordicTrack Elite 7700 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Before operating the TV, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm terminal, an AV cable to the audio/video input jack, or an HDMI cable to the HDMI input jack. Note: Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable. No CATV cable, antenna, or adapter; AV cable; or HDMI cable is included. HOW TO CONNECT AN ANTENNA Place an indoor VHF antenna or an outdoor combination VHF/UHF antenna in the desired location. Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your outdoor antenna and the lead-in wiring before connecting the antenna. Indoor VHF Antenna Outdoor Combination VHF/UHF Antenna 75 Ohm CATV Cable 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm terminal on the treadmill frame near the power cord. 300 to 75 Ohm Adapter 75 Ohm Terminal HOW TO CONNECT AN EXTERNAL SOURCE USING A CATV CABLE 1. Connect one end of a 75 ohm CATV cable to the 75 ohm output jack on your external source. 2. Plug in the power cord of your external source. See your external source user's manual for proper grounding instructions. 1. Connect the 75 ohm CATV cable from the antenna to the 75 ohm terminal on the treadmill frame near the power cord. 75 Ohm CATV Cable 75 Ohm Terminal 3. Connect the 75 ohm CATV cable to the 75 ohm terminal on the treadmill frame near the power cord. See the drawing at the left. 300 Ohm Flat Wire 1. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. Screwdriver 300 Ohm Flat Wire 300 to 75 Ohm Adapter 19