NordicTrack Freestride Trainer Fs9i English Manual - Page 11
Upper Neck Cover 17 to the Upper Bridge
View all NordicTrack Freestride Trainer Fs9i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Tip: Avoid pinching the wires. Insert the Console Bracket (3) into the Upright (2). Attach the Console Bracket with two M8 x 68mm Screws (125). Connect the wires from the Console (4) to the Main Wire (141), the Right and Left Control Wires (12, 13), and the Accelerometer Wire (138). 8 125 3 12 2 4 Avoid pinching the wires 141 13 138 125 9. Tip: Avoid pinching the wires. Attach the Upper Neck Cover (17) to the Upper Bridge Cover (16) with an M4 x 16mm Screw (98). 9 98 17 16 Avoid pinching the wires 10. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 11
11
8
8.
Tip: Avoid pinching the wires.
Insert the
Console Bracket (3) into the Upright (2). Attach
the Console Bracket with two M8 x 68mm
Screws (125).
Connect the wires from the Console (4)
to the Main Wire (141), the Right and Left
Control Wires (12, 13), and the Accelerometer
Wire (138).
9.
Tip: Avoid pinching the wires.
Attach the
Upper Neck Cover (17) to the Upper Bridge
Cover (16) with an M4 x 16mm Screw (98).
4
125
98
17
16
3
2
141
12
Avoid pinching
the wires
Avoid pinching
the wires
125
13
138
9
10.
Make sure that all parts are properly tightened before you use the elliptical.
Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.