NordicTrack Freestride Trainer Fs9i English Manual - Page 29

Then, reattach the Reed Switch Bracket (54) and slide the Reed Switch (56) slightly closer to or away from the Magnet (137). Plug in the power cord and rock the Pulley (73) forward and backward so that the Magnet passes the Reed Switch repeatedly. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, remove the Reed Switch Bracket (54), retighten the two M4 x 10mm Clamp Screws (126), and reattach the Reed Switch Bracket. Then, reattach the outer disc to the right outer shield and plug in the power cord. Next, see EXPLODED DRAWING B. Remove the M4 x 16mm Screw (98), and then remove the Access Cover (24) from the Right Inner Shield (21). Then, tighten the M10 x 80mm Screw (131) until the Drive Belt (72) is tight. 131 HOW TO ADJUST THE DRIVE BELT If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power cord. When you have properly adjusted the drive belt, reattach the access cover to the right inner shield. 29