NordicTrack Gx 2.7 Bike English Manual - Page 25

MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately. To clean the exercise bike, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. CONSOLE TROUBLESHOOTING If lines appear in the console display, see step 3 on page 23 and adjust the contrast level of the display. If the console does not display your heart rate when you use the handgrip heart rate monitor, see step 5 on page 18. HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first unplug the power adapter. Next, using a flat screwdriver, carefully remove the Shield Cover (26) from the Left and Right Shields (37, 58). 26 37, 58 Locate the Reed Switch (64). Loosen, but do not remove, the M4 x 19mm Screw (65). 35 54 65 64 Next, rotate the Left Crank Arm (35) until a Magnet (54) is aligned with the Reed Switch (64). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 19mm Screw (65). Plug in the power adapter and rotate the Left Crank Arm (35) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the shield cover. 25