NordicTrack Gx 2.7 Bike English Manual - Page 8

ASSEMBLY •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Left parts are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 7. •• In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.nordictrackservice.com/ registration on your computer and register 1 your product. •• activates your warranty •• saves you time if you ever need to contact Customer Care •• allows us to notify you of upgrades and offers Note: If you do not have Internet access, call 1-800-TO-BE-FIT (1-800-862-3348) and register your product. 2. Using a flat screwdriver, remove the Shield Cover (26) from the Left and Right 2 26 Shields (37, 58). Remove and discard the shipping screws and the shipping tube (not shown) on the rear of the Frame (50), if necessary. 37, 58 Set a sturdy piece of packing material under the rear of the Frame (50). Have a second person hold the Frame to prevent it from tipping while you complete this step. Identify the Rear Stabilizer (44), which has a handle. Attach the Rear Stabilizer (44) to the Frame (50) with two M8 x 70mm Screws (46). 44 Remove the packing material from under the rear of the Frame (50). 50 46 8