NordicTrack Gx 5.0 Pro Bike English Manual - Page 10

9. Orient the Upright (2) and the Top Shield (44) as shown. Slide the Top Shield upward onto the Upright. Have a second person hold the Upright (2) and the Top Shield (44) near the Frame (1) until step 10. Locate the wire ties in the Upright (2). Tie the lower end of one wire tie to the Main Wire (43) and to the Frame Pulse Wire (42). Tie the end of the other wire tie to the end of the Receiver Wire (40). Next, pull the upper ends of the wire ties upward out of the top of the Upright. Tip: To prevent the wires from falling into the Upright (2), secure the wires with the wire ties. 9 Wire Ties 44 2 Wire Ties 42 43 40 1 10. Tip: Avoid pinching the wires. Slide the Upright (2) onto the Frame (1). Attach the Upright (2) with four M10 x 16mm Screws (67) and four M10 Split Washers (100). Tip: Tighten the two Screws in the front of the Upright, and then tighten the other two Screws. Slide the Top Shield (44) downward and press it onto the Left and Right Front Shields (13, 14). 10 44 13, 14 100 67 Avoid pinching the wires 67 2 100 1 10