NordicTrack Gx 5.0 Pro Bike English Manual - Page 11
Attach the Rear Upright Cover 57 to the Upright
View all NordicTrack Gx 5.0 Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. Identify the Right Handlebar (20), which is marked with a "Right" sticker, and orient it as shown. Attach the Right Handlebar (20) to the Upright (2) with two M8 x 16mm Screws (69). Attach the Left Handlebar (7) in the same way. 11 69 7 2 69 20 12. Identify and orient the Rear Upright Cover (57) as shown. 12 Attach the Rear Upright Cover (57) to the Upright (2) with an M4 x 16mm Screw (77). 57 77 2 13. Untie and discard the wire ties on the Main Wire (43), the Frame Pulse Wire (42), and the Receiver Wire (40). While a second person holds the Console (4) near the Upright (2), connect the wires on the Console to the Main Wire (43), to the Frame Pulse Wire (42), and to the Receiver Wire (40). 13 4 43 2 77 Insert the excess wires into the Upright (2) or into the Console (4). 42 40 Tip: Start all the screws before tightening any of them. Also, avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (77). Avoid pinching the wires 11