NordicTrack Gx 5.0 Pro Bike English Manual - Page 6
Assembly
View all NordicTrack Gx 5.0 Pro Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Orient the Front Stabilizer (15) so that the indi- cated hole is facing the pin on the Frame (1). 1 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (15) to the Frame with two M10 x 105mm Screws (65). 15 65 2. While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (16) to the Frame 2 with two M10 x 105mm Screws (65). Pin 1 Hole 16 1 65 6