NordicTrack S45i Instruction Manual - Page 13

12. W ith the help of a second person, hold the console assembly (K) near the Handrails (86) (only one side is shown). Connect the ground wires (J) from the console assembly (K) to the Console Ground Wires (58) on the Crossbar (93). Next, insert the Upright Wire (81) through the two indicated looped ties (L) on the console assembly (K). Connect the Upright Wire (81) to the console wire (M). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Then, remove the wire tie (A) from the Upright Wire (81). 12 L K M 81 86 A J 58 93 13. S et the console assembly (K) on the brackets on the Handrails (86). Do not pinch any wires. Attach the console assembly (K) with the four 5/16" x 3/4" Screws (4) that you removed in step 9 and four 5/16" Star Washers (11); do not fully tighten the Screws yet. Insert the excess Upright Wire (81) into the console assembly. Then, pull the two ties (L) tight against the Upright Wire and cut off the ends of the ties. 13 86 L 81 11 4 K 86 11 4 13