NordicTrack T18.0 Treadmill Uk Manual - Page 11

If You Do Not Connect The Con

Page 11 highlights

9. With the help of a second person, hold the console assembly near the Upright (86). 9 Connect the Upright Wire (79) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Wire 79 Console Assembly Console 79 Wire 86 Wire Tie 10. S et the console assembly on the Handrails (81, 82) and the Upright (86). Be careful not to 10 pinch any wires. Insert the excess Upright Wire (not shown) into the Upright. Attach the console assembly to the Crossbar (not shown) with three #8 x 1/2" Screws (1). Do not fully tighten the Screws yet. 1 82 Console Assembly 1 81 86 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

11
10.
Set the console assembly on the Handrails (81,
82) and the Upright (86).
Be careful not to
pinch any wires.
Insert the excess Upright Wire
(not shown) into the Upright.
Attach the console assembly to the Crossbar
(not shown) with three #8 x 1/2" Screws (1).
Do
not fully tighten the Screws yet.
10
Console
Assembly
1
82
1
86
81
9.
With the help of a second person, hold the con-
sole assembly near the Upright (86).
Connect the Upright Wire (79) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the
Upright Wire.
Console
Assembly
Console
Wire
Wire
Tie
86
9
79
79
Console
Wire