NordicTrack T18.0 Treadmill Uk Manual - Page 8
careful not to pinch the Upright Wire 79., do not fully tighten the Patch, Bolts yet., See the inset
View all NordicTrack T18.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Slide the Upright Cover (87) onto the bottom of the Upright (86) as shown. 3 Have a second person hold the Upright (86) near the Base (94). See the inset drawing. Tie the wire tie in the Upright (86) securely around the end of the Upright Wire (79). Then, pull the other end of the wire tie until the Upright Wire is routed through the Upright. Wire Tie 86 Wire Tie Hole 79 4. Hold the Upright (86) against the Base (94). Be careful not to pinch the Upright Wire (79). 4 Insert three 3/8" x 2 3/4" Patch Bolts (7) with three 3/8" Star Washers (11) into the Upright. Partially tighten the 3/8" x 2 3/4" Patch Bolts (7) until the heads of the Patch Bolts touch the Upright (86); do not fully tighten the Patch Bolts yet. 86 94 87 Hole 79 86 79 7 94 11 8