NordicTrack T18.0 Treadmill Uk Manual - Page 9
do not fully tighten the Patch, Bolts yet. Do not press the Right Base Cover, into place yet.,
View all NordicTrack T18.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Slide the Adjustable Cushions (39) to firmness setting 5 (only one side is shown). 5 Identify the Right Handrail (82) and the Right Base Cover (84), which are marked "Right." Slide the Right Base Cover onto the Right Handrail. Hold a 3/8" x 1" Patch Bolt (4) on the end of a hex key and insert the Patch Bolt into the Right Handrail (82). Repeat this step with a second 3/8" x 1" Patch Bolt (4). Partially tighten the two 3/8" x 1" Patch Bolts (4) into the Right Handrail (82) and the Base (94) until the heads of the Patch Bolts touch the Right Handrail; do not fully tighten the Patch Bolts yet. Do not press the Right Base Cover (84) into place yet. Slide the Left Base Cover (not shown) onto the Left Handrail (not shown). Attach the Left Handrail to the Base (94) as described above. 39 6. S et the console assembly face down on a soft surface to avoid scratching the console 6 assembly. Remove the Screw (A) and lift off the Crossbar (80). Discard the Screw. 84 94 82 4 Console Assembly A 80 9