NordicTrack T18.0 Treadmill Uk Manual - Page 7

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish assembly. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex key one adjustable wrench one Phillips screwdriver scissors To avoid damaging parts, do not use power tools for assembly. 1. Go to www.iconsupport.eu and register your product. 1 Registration provides the following benefits: • activates your product manufacturer's warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers  Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) to register your product. 2. Make sure that the power cord is unplugged. Attach the Right Wheel Cap (90) to the Base (94) with two #8 x 3/4" Screws (2).  Attach the Left Wheel Cap (not shown) to the left side of the Base (94) in the same way. Cut the shipping tie holding the Upright Wire (79) to the Base (94). 2 90 2 94 79 Tie 7