NordicTrack Vu 19 Bike English Manual - Page 8
NordicTrack Vu 19 Bike Manual
View all NordicTrack Vu 19 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 110mm Screws (53). 3 3 53 4. Orient the Upright (4) and the Shield Cover (7) as shown. Slide the Shield Cover upward onto 4 the Upright. Have a second person hold the Upright (4) and the Shield Cover (7) near the front of the Frame (1). Next, locate the wire tie (A) inside the Upright (4). Tie the lower end of the wire tie to the Main Wire (58). Then, pull the upper end of the wire tie upward until the Main Wire is routed through the Upright. 1 4 7 A 58 1 8
8
3.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 110mm Screws (53).
53
1
3
3
4.
Orient the Upright (4) and the Shield Cover (7)
as shown. Slide the Shield Cover upward onto
the Upright.
Have a second person hold the Upright (4)
and the Shield Cover (7) near the front of the
Frame (1).
Next, locate the wire tie (A) inside the Upright
(4). Tie the lower end of the wire tie to the Main
Wire (58). Then, pull the upper end of the wire tie
upward until the Main Wire is routed through the
Upright.
4
4
7
58
1
A