Oki 62411601 Users' Guide ML320Turbo Series - Page 56
lock the printhead in place.
View all Oki 62411601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
9 Replace the printhead, making sure that the circuit board at the bottom of the printhead firmly engages the slot (1) in the carriage. 32T-hg06.eps 10 Reinstall the printhead clamp and swing it back over to lock the printhead in place. 32T-hg07.eps 5 5AVT0OTCR9EASN1IUCTTIH0OIOTN8NHCEH6HISAOSUTD 1 ! CAUTION! Be sure the printhead is fully inserted before proceeding. ! Important! The clamp must be between the black projection on the printhead and the metal plate on the carriage, on both sides. |56 Microline 320/321 Turbo
56
Microline 320/321 Turbo
|
9
Replace the printhead, making sure that the circuit board
at the bottom of the printhead firmly engages the slot (1)
in the carriage.
32T-hg06.eps
!
CAUTION! Be sure the printhead is fully inserted before
proceeding.
10
Reinstall the printhead clamp and swing it back over to
lock the printhead in place.
32T-hg07.eps
55091086
CAUTION
ATTENTION
VORSICHT
HOT
CHAUD
HEISS
!
Important! The clamp must be between the black
projection on the printhead and the metal plate on the
carriage, on both sides.
1