Oki C6000n C6000n User's Guide - Page 110

System Adjust Menu Notes: • Factory default settings are shown in bold. Item X ADJUST Y ADJUST DUPLEX X ADJUST Only appears when the option is installed. DUPLEX Y ADJUST Only appears when the option is installed. DRUM CLEANING Settings Explanation -2.00MILLIMETER TO +2.00MILLIMETER Default = 0.00 Adjusts overall print position horizontally in 0.25 increments. -2.00MILLIMETER TO +2.00MILLIMETER Default = 0.00 Adjusts overall print position vertically in 0.25 increments. -2.00MILLIMETER TO +2.00MILLIMETER Default = 0.00 Adjusts overall print position of print face horizontally in 0.25 increments. -2.00MILLIMETER TO +2.00MILLIMETER Default = 0.00 Adjusts overall print position of print face vertically in 0.25 increments. OFF ON If you are experiencing horizontal white lines on your printed pages, enter the menu and temporarily change this setting to ON, then send a one page print job. This will cause an extra blank sheet to print, cleaning the drum prior to printing. Careful! Leaving this set to ON will reduce the image drum life. C6000n User's Guide 110