Oki C7300 C7100/C7300/C7500 User's Guide: Windows - Page 63
USB Menu The default settings are bold.
View all Oki C7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Item USB SOFT RESET OFFLINE RECEIVE USB Menu The default settings are bold. Value ENABLE; DISABLE ENABLE; DISABLE ENABLE; DISABLE Description Selects USB interface. Enables/Disables soft reset command. Enable = maintains reception without changing the interface signal, even if an alarm occurs. The interface stays open even if the ON LINE button is pressed. The interface issues a BUSY signal only when the receive buffer is full. Network Menu This menu only appears if a network card is installed. The default settings are bold. Item TCP/IP NETWARE ETHERTALK NETBEUI FRAME TYPE DHCP/BOOTP RARP IP ADDRESS SUBNET MASK GATEWAY ADDRESS PRINT SETTINGS INITIALIZE Value ENABLE; DISABLE ENABLE; DISABLE ENABLE; DISABLE ENABLE; DISABLE AUTO; 802.2; 802.3 ETHER-II; SNAP ENABLE; DISABLE ENABLE; DISABLE xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx Description Selects TCP/IP protocol. Selects Netware protocol. Selects EtherTalk protocol. Selects NetBEUI protocol. Selects Ethernet frame type. Selects whether selection of DHCP/ BOOTP is automatic. Selects whether selection of RARP is automatic. Configures IP address. Configures subnet mask. Configures gateway address. ON; OFF ON; OFF Selects printing of network menu map. ON = When printer exits the menu mode it will print the network MenuMap showing results of self-diagnosis and settings. Selects network initialization. ON = network initializes as the printer exits the menu. C7100/C7300/C7500 Setting up • 62