Oki C911dn C911dn/C931dn/C941dn Basic User's Guide - Page 124
This explanation uses C931 LPD, selection will not be implemented.
View all Oki C911dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Before use Setting Up Printing Setting Power Save Mode 3 Select the [IP] icon. The following screen will be displayed. Enter the printer IP 1 address, "Queue" name, and "Name", and then check that the printer to be used is selected in "Use", and click the [Add] button. 5 The "Print & Scan" screen will be displayed, and the printer to be used (LPD) will be added to the printer list. Select the printer to be used (LPD) as the "Default printer". 2 (1) (2) (3) (4) 3 (1) Enter the IP address allocated to the printer in the client environment. 4 (2) Enter "Ip" as the queue name. (3) The IP address entered in Step (1) will be displayed. Enter any desired name. This explanation uses C931 (LPD) as an example. (4) The printer to be used (PS) will be displayed automatically as the driver. If you cannot communicate properly with the printer, auto selection will not be implemented. Note zz When the printer is in sleep mode, the drivers may not be selected correctly. Return the printer from sleep mode, and then enter the printer IP address in [Address]. 4 Set the printer options, and click [OK]. This way, the desired printer will be used as the default when printing. This completes the procedure for adding a printer, so close the "Print & Scan" screen. Basic Device Operations Appendix Index - 124 -