Oki MICROLINE 1120 Users Guide - Page 67
LOAD/EJECT button + LF/FF button
![]() |
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Setting TOF position at the place of user's choice TOF position can be set at the place of user's choice. The reference position refers to the first line of the paper i.e. the position to which the printer feeds the paper when automatically loading the paper. NOTE Adjusting of TOF can be done in cut sheet mode or continuous forms mode. 1. Move Paper Lever to the position of the paper to be set. 2. Continuous paper: Set the paper in Pin Tractor. Single sheets: Do not insert the paper. 3. Continuous paper: Push the LOAD/EJECT button and the paper will be fed to the printer Single sheets: Set the paper in the tray and the paper will be fed to the printer. 4. Switch to the off line. 5. Push the LOAD/EJECT button continuously and adjust the position of printing start by combining the following buttons. Forward (minute reline): LOAD/EJECT button + SEL button Rear (minute reline): LOAD/EJECT button + LF/FF button NOTE The range set for TOF is between 2.12mm(1/12 in) and 368/4mm(14.5 in). Outside the range, the paper can not be moved. When the paper is positioned at the required TOF, release the buttons in Step 5 above. To save this position as the TOF, press and hold down the LOAD/ EJECT and the LF/FF buttons together for 3 seconds under the Select condition. NOTE Do not turn the Platen Knob or switch off the printer during the above procedure. ML1120/ML1190 User's Guide - Operating instructions > 67
![](/manual_guide/products/oki-data-microline-1120-users-guide-82f12d5/67.png)