Oki MICROLINE 1120 Users Guide - Page 83
ML1120
![]() |
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Specifications ML1120 Item Product Name Model No. Print method Print head Print direction Print speed High Speed Draft (HSD) Letter Quality (LQ) Utility Line Feed (LF) time Form Feed (FF) speed Paper feed control Duplication capability Feeding direction Feeding mode Continuous forms tape tail detection method Character sets Media Specification ML1120 D22400B Impact dot matrix 9 pins, 0.3 mm (0.0118 in) diameter Bi-directional, short-line-seeking printing 333 cps @ 10 cpi 62.5 cps @ 10 cpi 250 cps @ 10 cpi Approximately 52 ms per line for LF of 4.23 mm (1/6 in) Approximately 101.6 mm/s (4.0 in/s) Paper feed: yes Vertical tab: yes Direct line feed: yes Continuous forms: the original page +4 more pages (total maximum paper thickness less than 0.325 mm) Cut sheet: the original page +4 more pages (total maximum paper thickness less than 0.325 mm) Feed forward Feed backward Friction feed mode (top) Pin tractor feed mode (rear) Detected when remaining paper is approximately 46 mm long. It can, however, print till about 6 mm from the paper bottom (measured at the centre of the characters). (The print accuracy of the last page cannot be guaranteed.) Standard ASCII Epson (Italics/Graphics) IBM (Set1/Set2) ML Foreign Code Page See "Setting the Paper Thickness lever" on page 28. ML1120/ML1190 User's Guide - Consumables and accessories > 83
![](/manual_guide/products/oki-data-microline-1120-users-guide-82f12d5/83.png)