Oki MICROLINE 390 TURBO Users Guide - Page 41
Connecting to the Parallel Port
![]() |
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Connecting to the Parallel Port Emulations ! If you want to use the parallel port, you MUST remove the Network Card from the printer. See the OkiLAN 6120e User's Guide for details. ! FCC regulations require the use of a shielded cable no longer than 6 ft. (1.8 m). An IEE 1284-compatible parallel cable is needed for bi-directional communications. 1 Plug the interface cable into the parallel port (1) and secure it with the wire loops. 32T-22.eps 2 Attach the other end of the cable to your computer. The factory default emulation for your printer is Epson® LQ. If you need to change the emulation, refer to "Using Your Printer, Emulations." Printer Drivers Before you can use your printer, you must select the correct printer driver in your software. If you select the wrong driver, you will see strange characters, incorrect fonts, etc. ! See your software documentation for information on how to select a printer driver. For more information on printer drivers, refer to "Using Your Printer, Printer Drivers." | User's Guide: English 41
![](/manual_guide/products/oki-data-microline-390-turbo-users-guide-fe3aae8/41.png)