Oki MICROLINE 390 TURBO Users Guide - Page 47
Setting Top of Form, Forms Tear-Off OFF
View all Oki MICROLINE 390 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Setting Top of Form, Forms Tear-Off OFF (Step B) ! If you turn the platen knob when the printer is turned on, you will cause the Top of Form to mis-align. Always turn the printer off before turning the platen knob! ! Always determine the status of the Forms Tear-Off menu setting BEFORE setting the Top of Form. Refer to "Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF)." 1 Turn the printer ON. 2 Press SEL/MENU (6) to take the printer off line. The SEL light goes out. 3 Press and hold SHIFT (1). Then, press LF / Micro Feed Down (2) or FF/LOAD / Micro Feed Up (3), depending on which direction you want to move the paper to align the tear-off position. | User's Guide: English 47
|
User’s Guide:
English
47
Setting Top of Form, Forms Tear-Off OFF
(Step B)
!
If you turn the platen knob when the printer is turned
on, you will cause the Top of Form to mis-align.
Always
turn the printer off before turning the platen knob!
!
Always determine the status of the Forms Tear-Off menu
setting BEFORE setting the Top of Form.
Refer to
“Using Your Printer, Top of Form, Forms Tear-Off
Status (ON or OFF).”
1
Turn the printer ON.
2
Press SEL/MENU (6) to take the printer off line.
The SEL
light goes out.
3
Press and hold SHIFT (1).
Then, press LF / Micro Feed Down (2) or FF/LOAD /
Micro Feed Up (3), depending on which direction you
want to move the paper to align the tear-off position.