Oki ML621 ML620, ML621 Users' Guide - English - Page 22

Tearing Off Continuous Forms Paper, Aligning the Tear-Off Perforations

Get Oki ML621 PDF manuals and user guides View all Oki ML621 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

NOTE: If the TOF position shifts because of taking up slack, press the LF/FF key to set the TOF position. Do not use the platen knob for this option as this will cause irregular line spacing. Tearing Off Continuous Forms Paper 1. With the SEL indicator illuminated, press the TEAR key to feed the continuous forms to the tear-off position. . Carefully tear off the forms along the tear-off perforations in the direction shown. . When data is received by the printer or when the SEL key is pressed to select the printer, the continuous forms is repositioned to the first line print position. Aligning the Tear-Off Perforations If the tear-off perforations are not aligned with the paper cutter on the access cover align them as follows: 1. With the SEL indicator illuminated, press the TEAR button to move the tear-off perforations to the paper cutter on the access cover. . Check the position of the tear-off perforations relative to the paper cutter. Adjust to the desired tear-off position using the 1/144" line feeds (LF). - To move the form forward, press and hold the TEAR and SEL keys at the same time. - To move the form backward, press and hold the TEAR and LF/FF keys at the same time. . When the tear-off perforations have been aligned with the paper cutter, release the keys. When data is received by the printer or when the SEL key is pressed to select the printer, the paper will retract to the new position. Removing Continuous Forms Paper 1. Tear off the continuous forms. . Press the LOAD/EJECT key to move the front edge of the continuous forms backwards to the Pin Tractors. NOTE: The printer switches to offline mode. The ALARM indicator illuminates to indicate that there is no paper present. If sprocket holes of the last page of the forms disengage from the sprocket pins, do not attempt to eject the paper to avoid the possibility of a paper jam. . Lift the pin tractor covers and remove the forms. . Close the pin tractor covers. ML620/ML621 User's Guide 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
ML620/ML621 User’s Guide
±±
NOTE: If the TOF position shifts because of taking
up slack, press the LF/FF key to set the TOF
position. Do not use the platen knob for this
option as this will cause irregular line spacing.
Tearing Off Continuous Forms Paper
With the
SEL
indicator illuminated, press the
TEAR
key to feed the continuous forms to the tear-off
position.
Carefully tear off the forms along the tear-off
perforations in the direction shown.
When data is received by the printer or when
the
SEL
key is pressed to select the printer, the
continuous forms is repositioned to the first line
print position.
Aligning the Tear-Off Perforations
If the tear-off perforations are not aligned with
the paper cutter on the access cover align them as
follows:
With the
SEL
indicator illuminated, press the
TEAR
button to move the tear-off perforations to the
paper cutter on the access cover.
Check the position of the tear-off perforations
relative to the paper cutter. Adjust to the desired
1.
±.
².
1.
±.
tear-off position using the 1/144” line feeds (LF).
- To move the form forward, press and hold the
TEAR
and
SEL
keys at the same time.
- To move the form backward, press and hold the
TEAR
and
LF/FF
keys at the same time.
When the tear-off perforations have been aligned
with the paper cutter, release the keys.
When data is received by the printer or when the
SEL
key is pressed to select the printer, the paper will
retract to the new position.
Removing Continuous Forms Paper
Tear off the continuous forms.
Press the
LOAD/EJECT
key to move the front edge
of the continuous forms backwards to the Pin
Tractors.
NOTE:
The printer switches to offline mode. The
ALARM indicator illuminates to indicate that
there is no paper present. If sprocket holes
of the last page of the forms disengage from
the sprocket pins, do not attempt to eject the
paper to avoid the possibility of a paper jam.
Lift the pin tractor covers and remove the forms.
Close the pin tractor covers.
².
1.
±.
².
³.