Oki ML6300 User Guide - Page 30

BUTTON SWITCHES SWITCH SEL SHIFT LF FF/LOAD TEAR PARK SHIFT+SEL STATUS FUNCTION On-line Sets the printer to off-line Off-line Sets the printer to on-line and disalarms the printer Used only in conjunction with one of the following buttons: SEL, LF, FF/LOAD, PARK, TEAR described below. On-line Feeds paper by one line. Holding the button down results in continuous line feeding. Off-line Feeds paper by one line. Holding the button down results in continuous line feeding. On-line and off-line Continuous form fed until Continuous Forms mode first line of next page On-line and off-line Ejects the cut sheet Cut sheet manual mode On-line Continuous Forms mode Delivers the continuous form to the cut position. If the button is pressed again or data is received, the original form position is restored. On-line Ineffective Cut sheet manual mode Off-line Ineffective Continuous Forms mode If the continuous form is in position, press to retract the form to the Pin Tractors. (If the sprocket holes of the last page of the form disengage from the sprocket pins, do not attempt to eject the paper as a paper jam may result.) Enters menu mode Operating instructions > 30