Oki ML6300 User Guide - Page 37

ITEM PE Detection Table Print Line Spacing Page Width Form Tear-Off Skip Over Perforation Page Length (Continuous) FUNCTION SETTING Select whether to detect paper end or not. Set whether to divide a path or not to print on occasions when printing by the same headpin continues for 3 in or more in the same print block. Select line feed pitch. Set width of a line to determine the number of ANK (10CPI) characters to be printed. With this setting, the right margin is set. For reduced-size prints, at 75 % or 50%, 136 characters are printed. Select manual or auto as the method to advance a continuous form to the form tearoff position. Select whether to skip over perforation or not. (When a skip over perforation setup command is received, the received command is given priority.) Select the length of a continuous form. OFF ON Standard Special 6 LPI 8 LPI 10.6 in 8 in Off 500 ms 1 sec 2 sec Yes No 3.5 in, 4 in, 5.5 in, 6 in, 7 in, 8 in, 8.5 in, 11 in, 11 2/3 in, 12 in, 14 in, 17 in, 5 in, 3 in, 3.25 in Operating instructions > 37