Oki ML6300 User Guide - Page 36

ITEM FUNCTION SETTING Rcv Buffer Print Suppress Effective Auto LF Auto CR *IBM PPR only SI Select Pitch (10CPI) *IBM PPR/AGM only SI Select Pitch (12CPI) *IBM PPR/AGM only Reset Inhibit Select Language Set *EPSON only Impact Mode Print Direction Command Power Save Time Select size of the received buffer. Set whether to enable or disable a print suppress setup command. Select whether to perform auto LF operation or not upon receiving a CR code. Select whether to perform auto CR operation upon receiving a carriage return command. Set how to handle an SI command received in 10 CPI mode. Set how to handle an SI command received in 12 CPI mode. Set whether to enable or disable an initial command. Set whether to enable or disable a combination of the code page setting and the language setting by menu. Select print mode on power on. (This item is referred to on initialisation only by IPRIME or power on but not by an initialisation command.) Select the validity of a one-way print setup command. Set idle time to enter power save mode. 0, 2 K, 32 K, 64 K Yes No Yes No Yes No 15 CPI 17.1 CPI 12 CPI 20 CPI No Yes Combined Code Page Only Normal Quiet Hi Copy Valid Invalid 5 min, 10 min, 15 min, 30 min, 60 min Operating instructions > 36