Olympus 135291 P-440 Reference Manual (English) - Page 35
Click on the Color Adjustment tab., Adjust the color., Clicking on Same allows R, G and B
UPC - 050332135284
View all Olympus 135291 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
• Color Adjustment using the "Driver" Setting If you selected the "Driver" checkbox under "Color Adjustment" in the "Paper" tab, you will be able to use a preview display as you adjust the color here. Tip • The color tone of the preview may differ from that of actual prints. The displayed color tone should only be used as a rough indication of color tone. 1 Click on the "Color Adjustment" tab. Tip • The "Color Adjustment" tab is only available when the "Driver" checkbox is selected under "Color Adjustment". 2 Adjust the color. Gamma: Brightness: Contrast: Defaults: Load: Save: Change the half-tone density (-5-5) of R, G and B, respectively, with the control bar or arrow tool. Clicking on "Same" allows R, G and B to be changed all at once. Change the total picture density (-5-5) of R, G and B, respectively, with the control bar or arrow tool. Clicking on "Same" allows R, G and B to be changed all at once. Adjust the contrast (-5-5) of R, G and B, respectively, with the control bar or arrow tool. Clicking on "Same" allows R, G and B to be adjusted all at once. Returns the setting of each parameter to the initial setting. Load saved color adjustment values. Saves the set values. Tips • The procedure for changing color adjustment from the printer and that for changing color adjustment from a PC are the same. • Adjustments made using the driver override those made on the printer. 35