Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 211
Connecting the camera to a printer
![]() |
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Connecting the camera to a printer Use the USB cable provided to connect the camera to a PictBridgecompatible printer. 1 Set the camera's USB mode to PRINT. g"USB setup - Selecting the connection destination" (P.197) • Have the card containing the pictures you want to print selected. 2 Turn the printer on and plug the printer end of the USB cable into the printer's USB port. • For details of how to turn the printer on and the position of the USB port, refer to the printer's instruction manual. 3 Set the camera's mode dial to q and plug the USB cable into the camera's USB connector. 4 Set the power switch to ON to turn the camera on. • ONE MOMENT is displayed and the camera and printer are connected. The PRINT MODE SELECT screen is displayed on the monitor. Make the print settings on the camera's monitor. g Go to "Printing pictures" (P.211). Power switch 10 • If the screen is not displayed after several minutes, turn off the camera and start again from Step 1. Note 210 Direct printing
![](/manual_guide/products/olympus-5060-c5060-wide-zoom-reference-manual-96-mb-dbce274/211.png)