Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 81
Flash intensity control
![]() |
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Flash intensity control You can adjust the amount of light emitted by the flash. In some situations, you may get better results by adjusting the light emission. Examples include small subjects, distant backgrounds, or situations when increased contrast is desired. Mode dial 1 Adjust the brightness by turning Control dial the control dial while holding F Exposure compensation down # and F at the same time. button • The exposure value is displayed on the control panel while the flash intensity control function is set. 4 Turning to the left decreases the light emission. Min. setting is -2.0. #Flash mode button Turning to the right increases the light emission. Max. setting is +2.0. TIPS • The flash intensity can be set in 1/3EV steps or 1/2EV steps. g"Exposure steps - Selecting the adjustment increments" (P.174) • The flash adjustment effect may not be sufficient if the shutter speed is faster than 1/300. Note Flash 80
![](/manual_guide/products/olympus-5060-c5060-wide-zoom-reference-manual-96-mb-dbce274/81.png)