Olympus 5060 C-5060 Wide Zoom Reference Manual (9.6 MB) - Page 83
In the top menu, select MODE, CAMERA, FLASH., Turn on the external flash.
View all Olympus 5060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
External flash (optional) 2 In the top menu, select MODE MENU → CAMERA → QFLASH. g"How to use the menus" (P.49) To use the external flash only → Select Q, then press e. Press e again to exit the menu. To use the external flash together with the built-in flash → Select IN+Q, then press e. Press e again to exit the menu. 3 Turn on the external flash. 4 • Set the mode dial to TTL-AUTO. • Be sure to attach the flash to the camera before turning the flash on. 4 Select the flash mode by turning the control dial while holding down #. g"Flash shooting" (P.74) • If close-up pictures are overexposed, try using the built-in flash by itself. Note • When the built-in flash and the external flash are used together, the built-in flash is used as the compensating light source. This means that if the amount of light from the external flash is insufficient (beyond its working range), the resulting pictures may be underexposed. Flash 82