Olympus DM-420 DM-420 Detailed Instructions (English) - Page 72
Press the, button.
UPC - 807360860875
View all Olympus DM-420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Menu setting method 7 Press the OK button. • Formatting begins and [Format !] flashes on the display. • [Format Done] appears when formatting ends. 4 72 Menu setting method Notes • When an microSD card is inserted in the recorder, be sure to confirm the recording media as either [Built-in Memory] or [microSD Card] so that there is no mistake (☞ P.54). • Never perform operations such as the following while processing, as they may damage the data. In addition, replace the batteries with two new ones in order to ensure that the batteries will not run out while processing. 1 Unplugging the AC Adapter while processing. 2 Removing the batteries while processing. 3 Remove the microSD card ard during processing when [microSD Card] is being used as the recording media. Performing any of these operations may damage the data. • Never format the recorder from a PC. • Once the recorder is formatted, the music files with DRM may not be transferred to the recorder again. • When the recorder is formatted, all the saved data, including locked files and read-only files, are erased. • After formatting, recorded voice file names may start from [0001]. • When returning the settings for the functions to their initial settings, use [Reset Settings] (☞ P.54). • Formatting on the recorder will be Quick Format. If you format the microSD card, information of file management is refreshed and the data inside the microSD card is not deleted completely. When handing over and disposing the microSD card, be careful about the data leakage from the microSD card. We recommend the microSD card to be destroyed when you dispose the microSD card (☞ P.22). • If the recorder is formatted, when the data has been erased by accident, connect to PC and copy the guidance data to the recorder by using supplied "Olympus Sonority" (☞ P.90).