Olympus DS-2200 DS-2200 Instructions (English) - Page 39
To enable alarm sound only, Press the, button to set, the hour., button to accept, the minute.,
View all Olympus DS-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
9,11 8,10 8 Press the FF or REW button to set the hour. 12 9 Press the PLAY button to accept the hour. The minute indicator flashes. 10 Press the FF or REW button to set the minute. 11 Press the PLAY button to accept the minute. 4 12 Press the STOP button to close the menu. Alarm Playback Function (ALARM) 9,11 12 8,10 An alarm tone will sound at the scheduled time. Press any button while the alarm sounds to play the file you associated with the alarm. To enable alarm sound only To set an alarm without audio playback, set the alarm while an empty folder is selected. • Start setting from step 3 ( P.38) of "Alarm Playback Function". • When alarm sound goes at the preset time, pressing any button stops the sound. ... Notes • The alarm playback function can be set for only one file at a time. • The alarm will sound at the scheduled time every day unless the alarm playback setting is cleared. • If you wish to change the file for alarm play, first turn the alarm settings "OFF", then make any desired new alarm settings. • The alarm will sound for 5 minutes and then stop. • If the recorder is in use at the scheduled time, the alarm will sound after the operation is finished. • The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the file associated with the alarm when you press any button. • The alarm playback setting is cleared if the selected file is erased. 39