Olympus DS-2200 DS-2200 Instructions (English) - Page 60
Connecting to your PC using the cradle
![]() |
View all Olympus DS-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Connecting to Your PC Connecting to your PC using the cradle Place the recorder on the cradle 2 1 Insert end A of the USB cable to your PC's USB port or USB hub. 1 2 Connect the end b of the USB cable to the cradle. 3 Make sure that the recorder is in the Stop mode, and place it in the cradle. 5 1 Set the recorder vertically. 2 While pushing down the top of the recorder, set the recorder on the cradle. In this case, make sure that concavity on the rear of the recorder fits convexity of PC. "REMOTE" is displayed on recorder if the USB cable is connected. Connecting to Your PC Remove the recorder from the cradle 1 Make sure that the recorder's record/play indicator lamp isn't flashing, and remove the recorder from the cradle. Hold the cradle with your hand, and raise the recorder from the top end to remove it from the hook, as shown in the illustration. Notes • Do not touch the connection point on the front of the cradle (at the low end), as that may cause bad connection. • The cradle does not have the recharging function. 60
![](/manual_guide/products/olympus-ds2200-ds2200-instructions-english-7ad1ad0/60.png)