Olympus E-420 E-420 Instruction Manual (English) - Page 117
Program line diagram (P mode), Exposure warning display, Shooting, Warning display, example blinking
UPC - 050332163898
View all Olympus E-420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Program line diagram (P mode) In the P mode, the camera is programmed such that the aperture value and shutter speed are automatically selected according to the subject's brightness as shown below. The program line diagram varies with the type of lens mounted. When using the 14 - 42 mm f3.5 - 5.6 zoom lens (focal length: 14 mm, ISO100) Program shift Exposure warning display If the optimum exposure cannot be obtained when pressing the shutter button halfway, the display will blink in the viewfinder and on the super control panel. Shooting mode Warning display example (blinking) Status The subject is too dark. Action • Increase the ISO sensitivity. • Use the flash. P The subject is too bright. • Decrease the ISO sensitivity. • Use a commercially available ND filter (for adjusting the amount of light). The subject is underexposed. • Decrease the aperture value. • Increase the ISO sensitivity. Information A The subject is overexposed. • Increase the aperture value. • Decrease the ISO sensitivity or use a commercially available ND filter (for adjusting the amount of light). 13 117 EN