Olympus E-420 E-420 Instruction Manual (English) - Page 72
button to raise the built-in flash., Select a flash mode.
UPC - 050332163898
View all Olympus E-420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3 Set RC mode on the camera to [ON]. • MENU[X][#RC MODE][ON] • The super control panel switches to RC mode. • You can press the INFO button to switch the super control panel display. 4 Use the super control panel to set the flash mode and other settings for each group. Flash intensity value Group • Select the flash control mode and adjust the flash intensity individually for groups A, B, and C. For MANUAL, select the flash intensity. 2008. 08.16 TTL +1.0 M 1/8 OFF - RC LO 2 Normal flash/Super FP flash • Switch between normal flash and Super FP flash. Communication light level • Set the communication light level to [HI], [MID], or [LO]. Flash control Flash mode intensity 5 Select a flash mode. Channel • Set the communication channel to the same channel used on the flash. • Red-eye reduction flash is not possible in RC mode. 6 Press the # button to raise the built-in flash. 7 After shooting preparations are completed, take some test shots to check the flash operation and images. 8 Begin shooting while checking the charging completed indications of the camera and flash. 7 x Notes • Although there is no limit to the number of wireless flashes you can use, it is recommended that each group have no more than three flashes to prevent flash malfunction due to mutual interference. • In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be used for flash shooting in this mode. • For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4 seconds. Wireless flash shooting may not operate properly when using a slower shutter speed or anti-shock setting. Flash shooting 72 EN